Fall protection nets

Safety nets

Fall protection nets are a permanent fall protection system for non-walkable skylights and/or domes. They can be applied internally to the supporting structure of the roof, or externally by fastening to double-sheet sandwich panels or corrugated metal sheets.

This system has been designed to ensure the safety of industrial or agricultural building roofs during maintenance phases, with the use of two distinct types:

  • COPERTEC: electri-welded mesh with triple selvedge at the ends. The horizontal and vertical wires are galvanized steel before welding;
  • COPERPLAX: electro-welded mesh with triple selvedge at the ends. The galvanized horizontal and vertical wires are also plastic-coated: the steel wire is immersed in a special primer, which facilitates the adhesion of PVC to the metal. The plastic-coated variant can be used to protect translucent sheets from the outside.

These nets are attached to the roof using special plates and accessories. Internal installation can be carried out on different structures.

The system is certified with ITC Technical Agrément n. 650/22 dated 12.05.2022.

Sale and minimum supply in rolls of 25 m.

  • Copertec Net
    Art. 007155
    Copertec Net h102 M.25
  • Copertec Net
    Art. 007156
    Copertec Net h122 M.25
  • Copertec Net
    Art. 007157
    Copertec Net h152 M.25
  • Copertec Net
    Art. 007158
    Copertec Net h183 M.25
  • Copertec Net
    Art. 007159
    Copertec Net h203 M.25
  • Copertec Net
    Art. 007160
    Copertec Net h253 M.25
  • Copertec Net
    Art. 007161
    Copertec Net h253 M.25
  • Coperplax Net
    Art. 007151
    Coperplax Net h122 M.25
  • Coperplax Net
    Art. 007152
    Coperplax Net h152 M.25
  • Coperplax Net
    Art. 007153
    Coperplax Net h183 M.25
  • Coperplax Net
    Art. 007154
    Coperplax Net h203 M.25
  • Breakstem rivet
    Art. 007162
    Breakstem rivet 7.7x28 mm
  • SS plate
    Art. 007163
    Plate 142x19x2,5 mm stainless steel aisi 304
  • EPDM gasket
    Art. 007164
    EPDM gasket 142x19x4 mm
  • Piatto S235 30x
    Art. 009539
    Piatto in acciaio zincato S235 30x3 L1000 mm con foratura ad interasse 50 mm, per infittimento dei fissaggi nelle parti iniziali, finali e di sovrapposizione della rete
  • Piatto S235 30x
    Art. 009541
    Piatto in acciaio zincato S235 30x3 L2000 mm con foratura ad interasse 100 mm, per interassi di fissaggio standard
  • HUS4-H 8x65
    Art. 007553
    HUS4-H 8x65 galvanised dowel